No. | Item | Index |
1 | Clean the workpiece size(chain link diameter) | Φ40-Φ155mm |
2 | High speed curved blade shot blasting machine (HEELBRATER turbo hurricane technology) | model:180X high speed:3100 turn/min power:18.5kw×3 shot blasting:300Kg/min×3 |
3 | Anchor chain operating mechanism | pull:the user determine the direction of operation:ÛÜ running speed:250-680 mm/min(frequency conversionspeed) |
4 | Running speed | lift 60t/h,power 5.5kw |
5 | splitter | Separation 60t/h,power 3.0kw separation wind speed 4~5m/s,waste content after separation ≤1%,qualified abrasive content ≤1% |
6 | Screw conveyor | Through put 60t/h,power 4.0kw |
7 | Abrasive supplier valve | Air control supplier abrasive(large abrasive supply 500kg/min) |
8 | Rust remove quality* | cleanliness: Sa2.5 (Swedish Standard) roughness is determined by pallet specifications. |
9 | This machine is suitable for abrasive | 0.8~1.5 (metal shot) |
10 | Exhaust emissions | Exhaust gas ≤100 mg/m3meet and greatly surpasses national standards |
11 | Gravity settling system | It can settle 0.1-0.5 small abrasive ,prevent abrasive from being sucked out by the fan and waste, extent the dust removal life, and greatly improve the environmental protection effect |
12 | Two stage blowback filter cartridge dust removal | Total air volume15200 m3/h power15kw |
13 | Three level water list dust removal | Circulating water pump spray streatment(user supplied by the poor) |
14 | Powers consume | Total power | About 80k w (specific power to meet the requirement of use) |
Compressed air consumption | 0.5-0.6 m3/min(for pneumatic control abrasive abrasive control valve) |
15 | Electrical control system | Electrical boxes, buttons ,cables ,bridges,etc. |
16 | Dimensions / footprint | See the general plan |